ECOLOGICAL STRIPPER - HIGH REACTIVITY
Guaranteed to contain no methylene chloride, NEP or NMP
without caustic soda, without formic acid
NON INFLAMMABLE - BIODEGRADABLE
FAST STRIPPING OF ALL PAINTS, RESINS, VARNISHES
ON ALL BASE SURFACES, ALL MATERIALS
LIQUID VEGETAL STRIPPER
TYPICAL PHYSICAL-CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Clear |
- |
|
Colour |
Visual |
Yellow |
- |
|
Smell |
Olfactory |
Slight |
- |
|
Density at 25°C |
NF EN ISO 12185 |
978 |
kg/m3 |
|
Refraction index |
ISO 5661 |
1.4490 |
- |
|
Freezing point |
ISO 3016 |
-4 |
°C |
|
Water solubility |
- |
partial |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
3.0 |
mm²/s |
|
Flow rate Cup 6 at 25°C |
NF EN ISO 2431 |
nm |
|
|
Acid index |
EN 14104 |
<1 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
<1 |
% |
|
Residue after evaporation |
NF T 30-084 |
<0.1 |
% |
|
PERFORMANCE CHARACTERISTICS |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
KB index |
ASTM D 1133 |
>180 |
- |
|
Evaporation speed |
- |
>3 |
hours |
|
Volatility index nBuAC=1 |
NF T 30.30 |
1.4 |
Quotient |
|
Evaporation index DEE=1 |
DIN 53.170 |
nm |
Quotient |
|
Surface tension at 20°C |
ISO 6295 |
32 |
dyne/cm |
|
Copper blade corrosion 100 h at 40°C |
ISO 2160 |
1b |
Measured value |
|
Aniline point |
ISO 2977 |
nm |
°C |
|
FIRE SAFETY CHARACTERISTICS |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Flashpoint (closed tank) |
NF EN 22719 |
95 |
°C |
|
Self-combustion point |
ASTM E 659 |
>200 |
°C |
|
Lower Explosive Limit |
NF EN 1839 |
2.6 |
% (volume) |
|
Upper Explosive Limit |
NF EN 1839 |
28.5 |
% (volume) |
|
Explosive, oxidising agent, flammable, highly or extremely flammable substance content |
CLP Regulation |
0 |
% |
|
TOXICOLOGICAL CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES |
|
UNITS |
|
Anisidine index |
NF ISO 6885 |
<2 |
|
- |
|
Peroxide index |
NF ISO 3960 |
<5 |
|
meq(O2)/kg |
|
TOTOX (anisidine index+2x peroxide index) |
- |
nm |
|
- |
|
CMR, irritant and corrosive substance content |
CLP Regulation |
0 |
|
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
|
% |
|
ENVIRONMENTAL CHARACTERISTICS |
||||
|
PROPERTIES |
STANDARDS |
VALUES |
|
UNITS |
|
Water hazard |
WGK Germany |
1 without hazard for water |
|
class |
|
Primary CEC biodegradability 21 days at 25°C |
L 33 T82 |
>80 |
|
% |
|
OECD easy biodegradability 301 A over 28 days Disappearance of COD |
ISO 7827 |
>80 |
|
% |
|
OECD easy and ultimate biodegradability 301 D over 28 days Biodegradation at 67 days |
MITI amended |
>70 |
|
% |
|
Bioaccumulation n-octanol water sharing index |
OECD 107 |
-1.35 |
|
KOW log |
|
Steam pressure at 20°C |
- |
<0.1 |
|
hPa |
|
VOC content (Volatile Organic Compounds) |
- |
20,40 |
|
% |
|
Total halogen content (Chlorine Fluorine Bromine) |
Bomb calorimeter GC MS |
0 |
|
% |
|
Benzene content |
LPCH |
0 |
|
% |
|
Aromatic solvent content |
LPCH |
0 |
|
% |
|
Environmentally-hazardous substance content |
- |
0 |
|
% |
|
Content of compounds with GWP |
- |
0 |
|
% |
|
Content of compounds with ODP |
- |
0 |
|
% |
Safety precautions:
if this product disintegrates and requires reconditioning, do not use metal packaging.
PRESENTATIONS
|
IBC GRV 1000 L
|
Drum 200 L
|
Can 25 L
|
Looking for another product?
|
Discover our entire range by clicking on the photo |
.jpg)
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on :
